|本期目录/Table of Contents|

[1]胡翔栋,马其华,张春燕,等.基于Arduino的车辆侧向盲区雷达防撞报警系统[J].电子设计工程,2020,28(01):184-188.[doi:10.14022/j.issn1674-6236.2020.01.040]
 HU Xiangdong,MA Qihua,ZHANG Chunyan,et al.A study of lateral radar anti?collision and alarm system based on the Arduino platform[J].Electronic Design Engineering,2020,28(01):184-188.[doi:10.14022/j.issn1674-6236.2020.01.040]
点击复制

基于Arduino的车辆侧向盲区雷达防撞报警系统(PDF)
分享到:

《电子设计工程》[ISSN:1674-6236/CN:61-1477/TN]

卷:
28
期数:
2020年01期
页码:
184-188
栏目:
图像分析与多媒体
出版日期:
2020-01-05

文章信息/Info

Title:
A study of lateral radar anti?collision and alarm system based on the Arduino platform
文章编号:
1674-6236(2020)01-0184-05
作者:
胡翔栋1马其华12张春燕12孙雨昊1温鑫豪1
(1.上海工程技术大学 机械与汽车工程学院,上海 201620;2.东华大学 机械工程学院,上海 201620)
Author(s):
HU Xiang?dong1 MA Qi?hua12ZHANG Chun?yan12SUN Yu?hao1WEN Xin?hao1
(1. College of Mechanical and Automotive Engineering, Shanghai University of Engineering and Technology, Shanghai 201620, China;2. College of Mechanical Engineering, Donghua University, Shanghai 201620, China)
关键词:
Arduino 侧旁雷达 汽车雷达 超声波测距
Keywords:
Arduino lateral radarvehicle borne radarultrasonic ranging
分类号:
TN953+.2
DOI:
10.14022/j.issn1674-6236.2020.01.040
文献标志码:
A
摘要:
基于Arduino平台侧旁防撞雷达系统,利用超声波雷达模块探测汽车侧面与障碍物的距离,数据经过处理传递,依据危险程度触发LED灯与蜂鸣器的声光报警功能,并使用Processing实时绘制雷达图,使结果更加直观。舵机与温湿度传感器的使用,提升了雷达系统的扫描范围与测距精度。经过实验,车辆在低速驾驶时,该雷达系统的侧旁防撞功能符合预期。
Abstract:
This lateral radar system is based on Arduino platform. Theultrasonic radar detects the range from automobile broadside to obstacle, then the distance data will be processed and transmitted. According to the level of danger, the system dictates whether the acousto-optic alarming function of led and buzzer will be triggered or not. Asthesametime, radar map will be drawn by Processing in real time so as to make results comprehensible. Owing to the miniature steering gear and the temperature and humidity sensor, the system has wider scanning scope and higher accuracy. This system has the function of avoiding lateral collision of cars at low speedsand the feasibility was demonstrated.

参考文献/References:

[1] 管岳. 汽车毫米波雷达目标识别方法的研究[D].苏州:苏州大学,2017.[2] 陈文鹤,毕欣,曹云侠.毫米波汽车防撞雷达波形设计[J].计算机测量与控制,2011,19(11):2714-2716.[3] 胡晨曦,杜自成,张祎博,等.基于汽车雷达的弯道行驶车辆防撞算法[J].火控雷达技术,2015,44(3):6-9,30.[4] 孙昱,柳贵东,付少波.汽车防撞雷达系统设计[J].军事交通学院学报,2015,17(5):90-93.[5] 柯振宇. 基于毫米波雷达的车辆纵向碰撞预警系统设计[D].武汉:武汉理工大学,2014.[6] 赵锴. 汽车防碰撞系统雷达设计与信号处理[D].青岛:青岛理工大学,2018.[7] 蒋林艳. 面向汽车主动防撞预警系统的虚警与漏警抑制研究[D].长春:吉林大学,2015.[8] 凌超. 汽车侧面盲区防撞预警系统的设计与实现[D]. 上海:复旦大学, 2013.[9] 马蕾,赵雨虹.针对汽车防撞雷达的信号处理[J].电子技术与软件工程,2018(14):82-83.[10]陈勇,黄席樾,杨尚罡.汽车防撞预警系统的研究与发展[J].计算机仿真,2006(12):239-243.[11]Ryndyk A G, Myakinkov A V, Shishanov S V. Distributed radar-based monitoring system for intelligent vehicles[J].IOP Conference Series: Materials Science and Engineering,2018,315(012022):1-9.[12]胡珂. 基于Arduino的智能小车测距安全行驶系统的研究[D].西安:长安大学,2015.[13]张哲,陈丽银,汪栋,等.基于Arduino Uno大型汽车盲区检测与报警装置的设计[J].科技创新与应用,2018(28):49-50.[14]秦博晟.基于Arduino的倒车雷达设计[J].电子技术与软件工程,2018(22):96-97.[15]李清瑞.基于Arduino的倒车雷达系统[J].信息通信,2018(1):133-134.[16]刘明,陈剑雪,陈鹏飞,等.基于Arduino的倒车雷达系统设计[J].黑龙江科技信息,2016(1):67.[17]刘楚红,董镇,钱宇捷,等.基于Arduino的倒车雷达系统设计[J].现代电子技术,2014,37(17):148-150,153.[18]蔡睿妍. 基于Arduino的舵机控制系统设计[J]. 电脑知识与技术, 2012,8(15):3719-3721.[19]曾建,荣联城,姜水明,等. 基于arduino平台的智能遥控小车设计[J]. 电子世界,2014(7):142.[20]Baskoro F, Reynaldo B R. Detection of lock on radar system based on ultrasonic US 100 sensor and arduino uno R3 with image processing GUI[J]. IOP Conference Series: Materials Science and Engineering, 2018,336(012016):1-7.

相似文献/References:

[1]刘卫国,王红彬.基于nRF24L01+与Arduino的超声波测距系统设计[J].电子设计工程,2015,(22):150.
 LIU Wei-guo,WANG Hong-bin.Design of ultrasonic ranging system based on nRF24L01+ and Arduino[J].Electronic Design Engineering,2015,(01):150.
[2]乔 杰,李致金,郝一飞,等.基于语音控制的智能假手系统[J].电子设计工程,2015,(12):4.
 QIAO Jie,LI Zhi-jin,HAO Yi-fei,et al.The system of intelligent prosthetic hand based on speech control[J].Electronic Design Engineering,2015,(01):4.
[3]赵春雨,王威锋,汤亚广.盲人辅助行走拐杖的设计[J].电子设计工程,2015,(09):183.
 ZHAO Chun-yu,WANG Wei-feng,TANG Ya-guang.Design of blind assisted walking stick[J].Electronic Design Engineering,2015,(01):183.
[4]李 伟.基于ZigBee的单片机无线通信系统实现[J].电子设计工程,2014,(22):157.
 LI Wei.An wireless communication system of MCU based on ZigBee protocol[J].Electronic Design Engineering,2014,(01):157.
[5]李 伟,董安定. Raspberry PI在课程设计中的应用[J].电子设计工程,2013,(19):33.
 LI Wei,DONG An-ding. Application of Raspberry PI in curriculum design[J].Electronic Design Engineering,2013,(01):33.
[6]汪晓红. 汽车倒车雷达系统的设计[J].电子设计工程,2013,(17):187.
 WANG Xiao-hong. Design of the automobile reversing radar systerm[J].Electronic Design Engineering,2013,(01):187.
[7]吕洁印,周受钦,曹广忠. 基于无线射频传输的大型车辆智能辅助倒车系统设计[J].电子设计工程,2013,(17):67.
 LV Jie-yin,ZHOU Shou-qin,CAO Guang-zhong. Design of intelligent parking assist system of big vehicle based on wireless RF transmission[J].Electronic Design Engineering,2013,(01):67.
[8]黄 洁,王福豹,段渭军. WSN节点超声波测距技术研究[J].电子设计工程,2013,(06):120.
 HUANG Jie,WANG Fu-bao,DUAN Wei-jun. Ultrasonic ranging technology of WSN nodes[J].Electronic Design Engineering,2013,(01):120.
[9]蔡睿妍. Arduino的原理及应用[J].电子设计工程,2012,(16):155.
 CAI Rui-yan. Principle and application of Arduino[J].Electronic Design Engineering,2012,(01):155.
[10]苑 洁,常太华.基于STM32单片机的高精度超声波测距系统的设计[J].电子设计工程,2011,(15):76.
 YUAN Jie,CHANG Tai-hua.Design of ultrasonic distance measurement systembased on STM32 microprocessor[J].Electronic Design Engineering,2011,(01):76.

备注/Memo

备注/Memo:
收稿日期:2019-05-27 稿件编号:201905142基金项目:2019年上海市大学生创新训练项目(cs1901006);2019上海工程技术大学大学生创新训练项目(cs1901001);上海市第五批应用型本科专业建设项目-汽车服务工程专业[沪教委高〔2017〕79号]作者简介:胡翔栋(1997—),男,上海人。研究方向:汽车服务工程。
更新日期/Last Update: 2019-12-31