|本期目录/Table of Contents|

[1]金思磊,管功湖,吴飞远,等.永磁起动机辅助磁极自动焊接PLC控制系统设计[J].电子设计工程,2020,28(01):79-83.[doi:10.14022/j.issn1674-6236.2020.01.018]
 JIN Silei,GUAN Gonghu,WU Feiyuan,et al.Design of PLC control system for auxiliary magnetic pole automatic welding of permanent magnet starter[J].Electronic Design Engineering,2020,28(01):79-83.[doi:10.14022/j.issn1674-6236.2020.01.018]
点击复制

永磁起动机辅助磁极自动焊接PLC控制系统设计(PDF)
分享到:

《电子设计工程》[ISSN:1674-6236/CN:61-1477/TN]

卷:
28
期数:
2020年01期
页码:
79-83
栏目:
测量与控制
出版日期:
2020-01-05

文章信息/Info

Title:
Design of PLC control system for auxiliary magnetic pole automatic welding of permanent magnet starter
文章编号:
1674-6236(2020)01-0079-05
作者:
金思磊管功湖吴飞远袁怀钰蔡远涛
(台州学院 电子与信息工程学院, 浙江 临海 317000)
Author(s):
JIN Si?lei GUAN Gong?hu WU Fei?yuan YUAN Huai?yuCAI Yuan?tao
(School of Electronics and Information Engineering,Taizhou University, Linhai 317000,China)
关键词:
辅助磁极 PLC 触摸屏 点焊 伺服分度
Keywords:
auxiliary magnetic pole PLC touch screen spot welding servo indexing
分类号:
TN702
DOI:
10.14022/j.issn1674-6236.2020.01.018
文献标志码:
A
摘要:
永磁起动机定子由机壳和多个磁极构成,每个磁极又分主磁极和辅助磁极,主磁极采用永磁材料制成,辅助磁极则用高导磁材料,通过点焊把多个辅助磁极均匀焊接在机壳内,然后用固定卡片把主磁极固定在辅助磁极之间。根据辅助磁极的焊接工艺要求,设计永磁起动机辅助磁极自动焊接的PLC控制系统,采用触摸屏为人机界面,以伺服系统作为分度控制,实现自动回原点、自动焊接、手动焊接、补焊及故障自动报警等功能。该控制系统实际运行稳定可靠,分度准确,可提高永磁起动机的质量和生产效率。
Abstract:
The stator of permanent magnet starter is composed of a machine case and several magnetic poles, and each pole includes main pole and auxiliary pole. The main pole is made of permanent magnet material, while the auxiliary pole is made of high permeability magnetic material. The auxiliary poles are uniformly welded in the machine case by spot welding, and then the main pole is fixed between the auxiliary poles by a fixed spring. According to the welding process requirements of auxiliary magnetic poles, a PLC control system for automatic welding of auxiliary magnetic poles of permanent magnet starter is designed. A touch screen is used as human-machine interface and a servo system is used as indexing control. The functions of automatic return to origin, automatic welding, manual welding, repairing welding and automatic fault alarm are realized. The actual operation of the control system is stable, reliable and accurate, which can improve the production quality and efficiency of permanent magnet starter.

参考文献/References:

[1] 张胜川,李建强.带辅助磁极永磁起动机的结构原理及电磁设计[J].微特电机,2010(6):5-7.[2] 刘志才,王瑞莎,毛树红.简述永磁减速起动机[J].汽车电器,2014(8):72-75. [3] 邓伟峰,熊 超,吴亦农.辅助磁极式直线振荡电动机特性研究[J].微特电机,2016,44(4):5-8.[4] 戴学志,陆 刚,张 斌.带辅助磁极的汽车起动机电机[P].中国专利:201320088787.2,2013-09-18. [5] 顾千虎,恽志宏.一种带辅助磁极的汽车起动机[P].中国专利:201420656302.X,2015-06-24.[6] 朱建兵.一种带有辅助级的汽车起动机定子[P].中国专利:201721183627.0,2018-04-20. [7] 朱维荣.一种带有夹环和辅助级的汽车起动机定子[P].中国专利:201721183495.1,2018-04-20.[8] 江 伟,谢再晋. PLC与触摸屏组建两轴数控点焊控制系统[J].焊接技术,2017,46(7):61-65.[9] 张桂香.基于PLC的专用焊机控制系统设计与实现[J].齐齐哈尔大学学报,2014,30(5):57-60.[10]朱锦洪,贾鹏飞,邱然峰. 基于PLC控制的逆变电阻点焊人机界面设计[J].焊接技术,2017,46(5):88-91.[11]江 伟,谢再晋. PLC与触摸屏组建两轴数控点焊控制系统[J].焊接技术,2017,46(7):61-65.[12]黄绍枝,朱振柏,曹 彪,等.精密电阻点焊伺服加压控制系统设计[J].焊接,2017(11):34-38.[13]陈宇姗,谢再晋. 新能源汽车定转子冲片机械手控制系统设计[J].锻压技术,2019,44(3):83-89. [14]无锡信捷电气股份有限公司.触摸屏用户手册[Z].2017.[15]无锡信捷电气股份有限公司. DS2系列伺服驱动器用户使用手册[Z].2017. [16]无锡信捷电气股份有限公司. XC系列可编程序控制器用户手册[Z].2017.

相似文献/References:

[1]程民利.基于红外检测的产品自动分装系统设计[J].电子设计工程,2011,(07):165.
 CHENG Min-li.Design of automatic split bottling system based on infrared detection[J].Electronic Design Engineering,2011,(01):165.
[2]周 烨.红外触摸屏抗强光干扰的研究[J].电子设计工程,2011,(04):59.
 ZHOU Ye.Research of infrared touch screen’s resistance of light interference[J].Electronic Design Engineering,2011,(01):59.
[3]王 平,黄玉志.基于PLC控制的包装码垛生产线的设计[J].电子设计工程,2011,(05):35.
 WANG Ping,HUANG Yu-zhi.Design of automatic bagging and palletizing line based on PLC control system[J].Electronic Design Engineering,2011,(01):35.
[4]崔静静,肖 伟,次仁朗杰,等.基于语言表达障碍者的藏文语音辅助系统的设计[J].电子设计工程,2011,(02):141.
 CUI Jing-jing,XIAO Wei,CI Renlangjie,et al.Design of Tibetan voice aided system based on speech express impediment’s people[J].Electronic Design Engineering,2011,(01):141.
[5]姚海军.基于面向对象的工控DCS系统编程教学方法探究[J].电子设计工程,2010,(09):33.
 YAO Hai-jun.Exploration for DCS programming teaching method based on OOP[J].Electronic Design Engineering,2010,(01):33.
[6]李金堂,樊润洁.一种无超调钝角拐点的PID温控设计[J].电子设计工程,2010,(08):82.
 LI Jin-tang,FAN Ruen-jie.A design of PID temperature control without superscale obtuse angle and inflexion[J].Electronic Design Engineering,2010,(01):82.
[7]王鹏.基于S7-200 PLC的位置控制器设计[J].电子设计工程,2010,(06):174.
 WANG Peng.Design of position controller system based on S7-200 PLC[J].Electronic Design Engineering,2010,(01):174.
[8]喻伟闯,罗晓曙,杨春慧.光纤连接器研磨机伺服控制系统设计[J].电子设计工程,2010,(06):29.
 YU Wei chuang,LUO Xiaoshu,YANG Chunhui.Design of servo control system for optical fiber connector polisher[J].Electronic Design Engineering,2010,(01):29.
[9]朱苹,徐克宝.基于触摸传感器QT1101的触摸屏设计[J].电子设计工程,2006,(11):58.
 ZHU Ping,XU Ke-bao.Design of touch panel based on touch sensor QT1101[J].Electronic Design Engineering,2006,(01):58.
[10]陈凡,李从飞.MXB7846型4线触摸屏数据转换器的原理及应用[J].电子设计工程,2005,(10):48.

备注/Memo

备注/Memo:
收稿日期:2019-05-24 稿件编号:201905130基金项目:国家大学生创业创新训练计划项目(201810350004)作者简介:金思磊(1997—),男,浙江金华人。研究方向:计算机及控制技术。
更新日期/Last Update: 2019-12-30